| |
|
> 1KW Turbines
These turbines are not available to purchase online as installed cost can vary considerably. Price shown is a guide price for the turbine unit only and does not include cabling, inverters, controllers, mast etc. If you are interested in purchasing a turbine, or just want more info, feel free to call us on +44 (0)1502 515 532 or email us: info [at] solarenergyalliance [dot] com
------------------------------------------------------------------------------------------------------------------------------------------
|
Bergey Windpower's newest product is the 1,000 Watt (1kw) BWC XL.1. The BWC XL.1 is currently available only as a 24 VDC battery-charging system.
With a rotor diameter of 2.5 meters (8.2 ft) and a peak output of approximately 1,300 watts the XL.1 is intended for the off-grid home market in the U.S. and for rural electrification programs in developing countries. It is also a perfect upgrade system for current owners of micro-turbines, such as the Air 303 or 403.
Download Info PDF
Download Manual PDF
Download Tower Info PDF
^ top ^ |
-------------------------------------------------------------------------------------------------------------------------------------------
|
The PMG-generator is constructed from standard motor parts in a fully enclosed housing, without fan or fan cover. The bearings are standard bal1 bearings with metal sea1ing and lifelong lubrication. The PMG generator pole wheel is made up from Neodinium (NE-Fe-Br) magnets glued on the surface of the pole wheel. Neodinium magnets have the highest energy rates of permanent magnets. Small magnets give a high-energy output of the generator. In this way the construction of the rotor wheel is strong and reliable. Only the stator has copper windings. For efficiency, the winding is three-phase, and class F insulation with special protection is used.
 Download Info PDF
^ top ^ |
------------------------------------------------------------------------------------------------------------------------------------------
|
SW Windpower Whisper 200 1kw
Formerly the Whisper H80, the Whisper 200 has been updated for 2005 with new features and added flexibility for your renewable energy system. Now, any Whisper 200 can have its voltage changed, 12-48V DC, within a few minutes in the field. The Whisper 200 is designed to operate in a site with low to medium speed averages of 8 mph, 3.6 m/s, and greater. The 200 provides 200+ kWh per month, 3.4 kWh per day, in a 12 mph average wind. The Whisper 200 does produce more noise than it's 100 counterpart, but it does produce almost twice the power.
Download Info PDF
Download Noise Report PDF
Download User Manual PDF
Download Spec Sheet PDF
^ top ^
|
------------------------------------------------------------------------------------------------------------------------------------------
 More Images
(opens in new window)
|
WT 2500The 2.5kW Proven wind turbine is the ideal wind turbine for powering a standard 3-bed house in the UK. The output almost matches typical demand of such a house (electrical appliances only, not electric heating) and can provide a little power for exporting in some cases. Several hundred of these turbines and its predecessor have been successfully installed world-wide. Surviving everything from hurricanes and cyclones to freezing cold temperatures in the arctic and scalding heat in the desert.This all-rounder is also aesthetically pleasing from a planning perspective due to it’s height being similar to that of a 600 watt telegraph pole and overall physical scale being in tune with a domestic dwelling.
WT 2500Rated Output: - 2500W (2.5kW)
Voltages available: - 12V / 24V / 48V / 120V / 240V / 300V
Annual Output - 2,500-5,000 kWh*
Rotor Diameter: - 3.5m
Hub Height: - 6.5m / 11m
Download Info PDF
Download Planning PDF
[ 11m mast ] [ 15m mast ]
Download Foundation Pack
[ zip format ] [ rar format ]
^ top ^
|
------------------------------------------------------------------------------------------------------------------------------------------
|
FuturEnergy Upwind Turbine 1kw
New ‘rugged’ Upwind Turbine range is based on 2 years of real-life testing and development in Warwickshire and the Uplands of Scotland.
Using unique Permanent Magnet Generators, combined with our Hi-Spec Wind Turbine Blade Sets, these furling turbines create very useful power in low wind conditions, and over 1000W in winds of 12.5m/s.
Available in 12V, 24V, 36V & 48V DC versions, they are suitable for battery charging, water/air heating and Grid-Tie installations.
Components / Spares available below.
Price: £591.49 (ex VAT) £695 (inc VAT)
Download Info PDF
12v 24v 36v 48v
Tower & Site Guide (.doc)
^ top ^ |
-----------------------------------------------------------------------------------------------------------------------------------------
|
|
Renewable News
